Introduction
Tools
- 
                  
                  - 
            Flip to the back cover of the laptop. 
- 
            Remove the 1 cm Phillips #00 screws on the back cover. 
- 
            Use pry tools to remove the back cover. 
 
- 
            
- 
                  
                  - 
            Take out your Phillips #00 screwdriver. 
- 
            Remove the 1 cm screws of the battery. There are two of screws, one is on the left of the battery and the other is on the right. (circled in red). 
 
- 
            
- 
                  
                  - 
            Unplug the battery from the motherboard by pulling the bundled cable connector free. 
- 
            Lift the top part of battery. 
- 
            Slide the battery forward to remove it completely from the motherboard. 
 
- 
            
- 
                  
                  - 
            Unscrew and remove the two 1 cm Phillips #00 screws that secure the touchpad bracket. 
- 
            Lift bracket to remove from touchpad. 
 
- 
            
                            
                            Conclusion
                          
                          To reassemble your device, follow these instructions in reverse order.