Introduction
If you need access to any of the internal components of your Altec Lansing VersA Smart speaker to replace components, start with this basic removal guide. This guide is a prerequisite to all other repair guides. In this guide, you will remove all external panels and coverings to expose the components within.
Tools
- 
                  
                  - 
            Use blue plastic opening tool to remove the external speaker face by placing it in the slight opening at the bottom. 
- 
            Use a lever motion, push the tool down, lifting the speaker face. 
- 
            Use fingers to grip and remove speaker face. 
- 
            Repeat on reverse side to remove the second speaker face. 
 
- 
            
- 
                  
                  - 
            Orient speaker so volume buttons are facing away from you, and Bluetooth and power buttons are on the left-hand side. 
- 
            Remove the seven 14mm screws using the Phillips #1 screwdriver. 
 
- 
            
- 
                  
                  - 
            Reorient speaker so Bluetooth and power buttons are now on the right-hand side. 
- 
            Separate the two panels along the crease. 
- 
            Blue plastic opening tool may be needed to separate panels. 
- 
            Remove the panel with no buttons to expose internal area of the device. 
 
-