Introduction
Tools
- 
                  
                  - 
            Remove the four white stickers on your device's back panel. 
- 
            Due to the strong adhesive supporting the stickers, we recommend heating them up to make removal easier. 
 
- 
            
- 
                  
                  - 
            Unscrew the four 50 mm screws with a T3 Torx screwdriver. 
- 
            Pop the sides and remove the back panel of the device. 
 
- 
            
- 
                  
                  - 
            Remove the five 2 mm screws with a Torx T5 screwdriver. 
- 
            Remove the two 5 mm with a Torx T3 screwdriver. 
- 
            Remove both ends of the connector from the main device. 
- 
            Remove the black panel. 
 
- 
            
                            
                            Conclusion
                          
                          To reassemble your device, follow these instructions in reverse order.