Introduction
This guide will detail each step necessary to replace the brush roll on a Bissell Bolt ION 2-in-1 Cordless vacuum.
- 
                  
                  - 
            Push the release button on the back side of the device near the swivel head, to detach the swivel for convenient access to the brush roll. 
 
- 
            
- 
                  
                  - 
            The guard notch will automatically be down in the locked position. 
- 
            Slide the guard notch to the unlocked position. 
 
- 
            
- 
                  
                  - 
            Lift up the latch to the right of the guard notch to access the brush. 
- 
            While holding up the latch remove the brush. 
 
- 
            
                            
                            Conclusion
                          
                          To reassemble your device, follow these instructions in reverse order.