Introduction
Need to get inside your Blackberry Storm to fix it? Or just want to salvage parts? This is an easy to follow guide to do it!
Tools
- 
                  
                  - 
            Turn your Storm where the battery door is facing up. 
- 
            Remove the battery door. 
- 
            Remove the battery. 
 
- 
            
- 
                  
                  - 
            Remove the plastic piece that covers the camera & flash on the back . This is held in with some tape so use a safe pry tool. 
- 
            Remove the two hex screws underneath it. 
 
- 
            
- 
                  
                  - 
            Turn the phone over and remove the plastic cover under the buttons as shown. 
- 
            Remove the 2 screws underneath. 
 
- 
            
- 
                  
                  - 
            Go around your device with the plastic pry tool, there a 3 clips on each side of the housing. 
- 
            There is a connection for the antenna from the front to mid housing. Remove it with a pry tool if it does not come off by itself. 
 
- 
            
- 
                  
                  - 
            To remove the main board from the mid housing disconnect the ribbon cable as pictured. 
- 
            Now follow in reverse order for reassembly! 
 
- 
            
To reassemble your device, follow these instructions in reverse order.