Canon PowerShot ELPH 150 IS Battery Replacement

Written By: Morgan Forester
  • Comments: 0
Canon PowerShot ELPH 150 IS Battery Replacement

Difficulty

Easy

Steps

7

Time Required

30 seconds - 1 minute

Introduction

This guide will teach you how to replace the battery for your camera.

  1. JqKplgieJKw6JZDv
    JqKplgieJKw6JZDv
    UTTYXuKkLKmZg1OG

    • Safety First: Power off your device. Locate the On/Off button.

  2. 53tERxlXHRfyCxEP

    • Hold button down firmly until the screen goes dark and the camera is powered off.

  3. GWXFAKcjq4LocQHW

    • Locate the Battery door which is marked, "CARD/BATT OPEN"

  4. OHDQVTEFHgtdDmub

    • Press the door down with your thumb and slide to the right until you hear a click. This means the door has unlocked and will open.

  5. OFHYbMJWNbW6YNVt

    • With the door open, locate the orange clip near the edge of the camera. This clip is holding the battery in place.

  6. Gy32JQn5TUvspEsN

    • Press the orange clip back towards the back plate to release the battery.

  7. 1qIvYVZ3ok1qqK5v

    • The battery should pop out easily and you can simply remove the battery from its housing.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Morgan Forester

Member since: 22/03/17

284 Reputation

0 comments