Canon PowerShot S410 Battery Replacement

Written By: Randy Lormand
  • Comments: 1
Canon PowerShot S410 Battery Replacement

Difficulty

Very easy

Steps

3

Time Required

1 - 2 minutes

Introduction

This guide demonstrates how to remove and replace the battery pack.

  1. jIMwnyWSI3SXoSbo
    jIMwnyWSI3SXoSbo
    4SOZrVvgxu5N2MSw

    • Turn the camera with the bottom side facing up.

    • Locate the panel labeled "Batt. Open"

    • Place your finger on the panel and slide it in the direction of the arrow.

    • The slot will swing open revealing the battery pack.

  2. 6YAXDjDmausnZyqf

    • Pull the orange lever and the battery will spring out slightly.

  3. AyWNI1HnCVhIpWyd
    AyWNI1HnCVhIpWyd
    YlXOFnjx3h6gvNVQ

    • Grasp the battery and fully pull it out of its slot.

    • When placing the new battery back in the slot, the arrow on the battery must align with the arrow on the camera.

Conclusion

After a new battery has been inserted, close the swinging door and you're done. Take your e-waste to an R2 or e-Stewards certified recycler.

Author

Randy Lormand

Member since: 24/01/11

349 Reputation

One comment

One piece battery

Aasim Ansari -