Introduction
If your lid has become warped over time, use this guide to replace it.
-
-
Lift the lid of the Perfectea
-
Remove the two 12mm Phillips #2 screws located at the brim of the pot.
-
-
-
With one hand, firmly grip the lid while designating your other hand to wedge the spudger between the lid and the glass pot.
-
Working from the outside to the inside, gently pry the adhesive tape from the glass pot, detaching the lid.
-
Conclusion
To reassemble your device, follow these instructions in reverse order.
One comment
This guide applies to the Capresso H2O kettle too. Thanks for the guide.