Introduction
This guide will teach you how to replace the motherboard within the Capresso Perfectea.
Tools
- 
                  
                  - 
            Remove the four 12 mm Phillips #2 screws surrounding the base then lift the bottom half of the base to expose the circuit boards inside the device. 
 
- 
            
- 
                  
                  - 
            Use the metal spudger to cut open the rubber covering the latch where it clamps onto the copper tab. 
- 
            Unplug wire at heating element by first using the metal spudger to push the latch in and then pushing it out. 
 
- 
            
                            
                            Conclusion
                          
                          To reassemble your device, follow these instructions in reverse order.