Introduction
This guide will show you how to replace the display and will require soldering.
Tools
- 
                  
                  
- 
            
Open the lid of the coffee pot.
 - 
            
Remove the two 1.6mm Phillips #1 screws from inside of the lid.
 
 - 
            
 - 
                  
                  
- 
            
Slide the display into the coffee maker so that way you can access the screws in the back.
 - 
            
Remove the four 1mm Phillips #0 screws from the back of the display.
 
 - 
            
 - 
                  
                  
- 
            
Remove the back panel from the display.
 - 
            
Remove the 1mm Phillips #0 screw from the motherboard.
 
 - 
            
 
                            
                            Conclusion
                          
                          To reassemble your device, follow these instructions in reverse order.