Introduction
This guide will show how to install the top casing on the CygoLite night rover. It will start from the torn-down position and show the proper installation of the top casing.
Tools
Parts
-
-
Start with the device torn down to just the base, with the internals of the device showing.
-
Place the top casing onto base.
-
Ensure that the rubber gasket is positioned properly between the top and bottom casings
-
Flip the device with the bottom facing upwards.
-
Reinsert and screw in the screws to the bottom casing.
-
Conclusion
To reassemble your device, follow these instructions in reverse order.
