Introduction
Tools
- 
                  
                  - 
            Flip open the top panel to reveal water reservoir. 
- 
            Grab the water reservoir by the handle and lift out. 
 
- 
            
- 
                  
                  - 
            Flip the device on its head, front end facing you. 
- 
            Using the Phillips #2 unscrew the two 52 mm screws found underneath the top portion of the device. 
 
- 
            
- 
                  
                  - 
            Flip the device back to its proper orientation. 
- 
            Using the Phillips #2 screwdriver remove the two 52 mm screws found on the lip next to the reservoir. 
 
- 
            
- 
                  
                  - 
            Insert the two plastic opening tools beneath the top knob. 
- 
            Use the two plastic opening tools as leverage to lift the top knob off. 
 
- 
            
- 
                  
                  - 
            Use a plastic opening tool to push in the slot on the back panel while lifting. 
- 
            Similarly, reach into where the reservoir used to be and insert a plastic spudger underneath the inside panel. 
 
- 
            
- 
                  
                  - 
            You are now ready to lift the top off. 
- 
            Place one hand near the back, the other at the front, and lift. 
 
- 
            
To reassemble your device, follow these instructions in reverse order.
My model EC155, serial #43222 requires a Security Torx vs. a #2 Phillips to remove the 12mm screws at each corner of the bottom panel
Mike Hines -