Dell Streak 10 Pro Battery Replacement

Written By: Matthew Ko
  • Comments: 0
Dell Streak 10 Pro Battery Replacement

Difficulty

Moderate

Steps

4

Time Required

20 minutes

Introduction

This guide will walk you through replacing a dead or faulty battery in a Dell Streak 10 Pro Tablet.

  1. 1XQTweLLUiNXURGg
    1XQTweLLUiNXURGg
    acUeSE1Ar1i5SAdg
    HWEbZ6FDuYaAxHc6

    • Place the device flat on its screen.

    • Using the plastic opening tools, pry open the top segment of the tablet where the camera is located.

    • Take the segment off and place it to the side.

  2. krYEedUi4Q2Hj66f
    krYEedUi4Q2Hj66f
    6sEirHEw21YSGs2P

    • Remove four 4mm Phillips #0 screws.

  3. afZQQrYQTSBMerBk
    afZQQrYQTSBMerBk
    J14JWI1pZVFyQYA1

    • Using the plastic opening tool, lift off the entire back screen of the tablet.

  4. PgQQmbbPBpWFD2mo
    PgQQmbbPBpWFD2mo
    MYHC5WlxUyqV3ka1
    pXsd1QVCbFElZUMr

    • Disconnect the no-fuss ribbon cable connector.

    • The best way is to safely pull the white connector straight out of the socket. Using the tweezers, pull out the white connector that contains the red, green, blue, and black cords connected to it.

    • Remove the battery by gently lifting it out of the device.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Matthew Ko

Member since: 06/02/19

440 Reputation

0 comments