Introduction
If your speakers seem to be not in the best condition or broken entirely, use this guide to help change out your speakers. You will need a Phillips #0 screwdriver, a plastic opening tool, and tweezers.
Tools
- 
                  
                  - 
            Place the device flat on its screen. 
- 
            Using the plastic opening tools, pry open the top segment of the tablet where the camera is located. 
- 
            Take the segment off and place it to the side. 
 
- 
            
- 
                  
                  - 
            Disconnect the no-fuss ribbon cable connector. 
- 
            Remove the battery by gently lifting it out of the device. 
 
- 
            
- 
                  
                  - 
            Gently lift up the black covered wire and place it on the side, so that it is not in the way of the procedure. 
 
- 
            
- 
                  
                  - 
            Using the tweezers, carefully pull out the cable straight out of the no-fuss ribbon cable connector. 
 
- 
            
- 
                  
                  - 
            When dealing with a zero insertion force connector, the best way it to carefully use a tweezer to flip up the white locking flap holding the blue-tipped ribbon cable. 
- 
            Then, gently remove the ribbon cable from the socket. 
 
- 
            
- 
                  
                  - 
            When dealing with a zero insertion force connector, the best way it to carefully use a tweezer to flip up the white locking flap holding the blue tip wire. 
- 
            Then gently remove the wire from the socket. 
 
- 
            
- 
                  
                  - 
            Using the tweezers, carefully flip up the locking tab on the Zero Insertion Force connector. 
- 
            Then, gently disconnect the orange ribbon cable. 
 
- 
            
- 
                  
                  - 
            When dealing with a zero insertion force connector, the best way it to carefully use a tweezer to flip up the white locking flap holding the orange ribbon cable. 
- 
            Once the white tab is lifted, use the tweezer to carefully pull out the orange ribbon cable. 
 
- 
            
- 
                  
                  - 
            Using your fingers, wiggle the speaker until it comes free from the device. Carefully remove it from the tablet. 
 
- 
            
- 
                  
                  - 
            Using your fingers, wiggle the other speaker until it comes free. Carefully remove it from the tablet. 
 
- 
            
To reassemble your device, follow these instructions in reverse order.