Disassembling GravityLight Front Panel

Written By: Michallynn Hoffman
  • Comments: 0
Disassembling GravityLight Front Panel

Difficulty

Easy

Steps

2

Time Required

1 - 5 minutes

Introduction

  1. kbSEYgCjc6yTDfaw
    kbSEYgCjc6yTDfaw
    lnHEJoYi6CICoJXT

    • Flip the GravityLight on its back and place it on a sturdy surface.

    • Unscrew the three 2cm Phillips #00 screws on the back of the GravityLight’s body.

  2. cRbvBmMQ4fVLRaug

    • Some of the internal pieces may loosen or fall out during disassembly.

    • Firmly grasp both parts of the GravityLight body and pull them apart.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Michallynn Hoffman

Member since: 26/09/14

317 Reputation

0 comments