Introduction
Is your screen blanking out in the middle of your favorite scene? Replacing the screen may help.
Tools
- 
                  
                  - 
            Remove the four screws underneath the rubber feet of the device. 
- 
            The top two screws are 3.175 mm head, 4.762 mm length flat-heat screws. 
- 
            The bottom two screws are 4.762 mm head, 6.35 mm length flat-head screws. 
 
- 
            
- 
                  
                  - 
            Using a plastic opening tool, lift off the screen cover from the screen and the top of the device. 
 
- 
            
- 
                  
                  - 
            Remove the black tape connecting the wires to the front cover. 
- 
            The tape can be removed with tweezers or your fingers. 
 
- 
            
- 
                  
                  - 
            Remove the screen's ribbon cable by lifting the connecting flap with your fingers. 
- 
            Gently pull out the ribbon cable with tweezers or your fingers. 
 
- 
            
- 
                  
                  - 
            Remove the black and white wires by desoldering them from the circuit board attached to the case. 
 
- 
            
To reassemble your device, follow these instructions in reverse order.