Echo Power Pruner 254 cc PPT2620 2019 Control Handle Assembly Replacement

Written By: Adam O'Camb
  • Comments: 0
Echo Power Pruner 254 cc PPT2620 2019 Control Handle Assembly Replacement

Difficulty

Easy

Steps

3

Time Required

2 - 5 minutes

Introduction

Use this guide to remove the control handle assembly on an Echo Power Pruner 254 cc PPT2620 2019.

  1. gigWZpfBcrWPbDJp
    gigWZpfBcrWPbDJp
    G43OEnDJ1FPduch1

    • Move the stop switch into the "stop" position to turn the pruner off before attempting any repairs.

    • Pull the spark plug cap straight off of the spark plug.

  2. tXlLKriELHhOyHXw

    • Use a T25 Torx screwdriver to loosen (but not remove) the two screws clamping the main pipe assembly to the control handle.

  3. YlfCcEx6OT1KOekW
    YlfCcEx6OT1KOekW
    OK6KUWqLVU4l4ILo

    • Remove the control handle from the main pipe assembly.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Adam O'Camb

Member since: 11/04/15

206065 Reputation

0 comments