Flash and re-install the firmware of TCA Yoke

Written By: Formica Fusca
  • Comments: 0
Flash and re-install the firmware of TCA Yoke

Difficulty

Very easy

Steps

6

Time Required

2 - 5 minutes

Introduction

Guide on how to re-install the firmware, if it became corrupted and the TCA Yoke is not powering on.

    • Download and install the driver package from here.

    • TCA Yoke and TCA Quadrant both use the same driver.

    • Press on the Windows button and type "Firmware Update" into the search.

    • Unplug your TCA Yoke from USB port if you already have it plugged-in

  4. RANlMJYEyRSHlcuq

    • Press and hold the Xbox button.

    • Make sure to set your Yoke into PC mode, using the switch at the back, before proceeding to the next step.

  5. hGMTXrMhCJ4IRpHr

    • Keep holding the Xbox button and connect the Yoke to USB port.

    • Once connected, wait a few seconds and let go of the button.

    • Your TCA Yoke should show up in Firmware Updater.

    • Press OK on the Firmware Updater and wait for update to complete.

Author

Formica Fusca

Member since: 01/08/24

2587 Reputation

0 comments