Garmin Rino 700 Battery Disconnect

Written By: Justin Ogihara
  • Comments: 0
Garmin Rino 700 Battery Disconnect

Difficulty

Easy

Steps

3

Time Required

5 - 10 minutes

Introduction

Prerequisite-only.

  1. QYurGHs1G2ojfoOQ

    • Flip the Garmin Rino 700 over so that the underside is facing up.

    • Using the TR6 Torx Security screwdriver, remove the six 9.5 mm screws on the backside of the device.

  2. F26F6LT13GtqZiUW
    F26F6LT13GtqZiUW
    suvuHpAyAMYGWaQD

    • Remove the battery cover and set it to the side.

  3. oQUJ4T1jr1QX24gM
    oQUJ4T1jr1QX24gM
    3vNJe4KiJpKAnW1j

    • Use the spudger to disconnect the battery wire port from the motherboard.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Justin Ogihara

Member since: 18/09/17

28705 Reputation

0 comments