Introduction
This is a prerequisite guide! This guide is part of another procedure and isn't meant to be used alone.
Single step screen disconnect
-
-
Separate the screen from the phone.
-
Check that all screws are tightened and there are no loose parts.
-
Reconnect the screen and test your phone to make sure it works. Power it back down and continue reassembly.
-
Apply new adhesive where it's necessary after cleaning the relevant areas with isopropyl alcohol (>90%).
-
Follow this guide if you're using custom-cut adhesives for your device.
-
Follow this guide if you're using a pre-cut adhesive card.
-
Conclusion
To reassemble your device, follow these instructions in reverse order.
