Introduction
Tools
Parts
- 
                  
                  - 
            Starting with the laptop on its back, remove the 13 screws holding the keyboard in place with a P00 screwdriver (2 screws are hidden behind the rubber footers) 
- 
            Open the screen, revealing the keyboard. Using a prying tool, 'pop' the keyboard out by sliding the tool around the edge 
 
- 
            
- 
                  
                  - 
            Gently raise the keyboard from the body, careful not to rip out the ribbons 
- 
            With light pressure, flip the black bar holding the ribbons in place, and remove the ribbons from the body 
 
- 
            
- 
                  
                  - 
            With a P00 Screwdriver, remove the 9 screws holding the battery in place 
- 
            Gently pry the cable connecting the battery to the motherboard off 
- 
            Battery will lift away from the body (screen will now be heavier than the body, be careful not to drop it) 
 
- 
            
- 
                  
                  - 
            Gently disconnect the cable connecting the internal speaker to the motherboard 
- 
            Using a P00 Screwdriver, remove the final screw from the left speaker 
- 
            Using a prying tool, carefully remove the speaker out of the body 
 
- 
            
- 
                  
                  - 
            With a P00 Screwdriver, remove the final screw from the right speaker 
- 
            Carefully remove the right internal speaker from the body 
- 
            The entire speaker (barring some tape you may need to remove) should lift away from the body of the laptop 
 
- 
            
To reassemble your device, follow these instructions in reverse order.