Introduction
Use this guide to replace the entire keyboard if it is unresponsive or not functioning properly.
Tools
- 
                  
                  - 
            Ensure that the laptop is completely powered off, then flip it over to identify the battery latch located towards the bottom of the back panel. 
- 
            Push the latch to the unlocked position. 
 
- 
            
- 
                  
                  - 
            On the back panel of the laptop are two screws which have a keyboard symbol next to them. 
- 
            Using a Phillips screwdriver with a PH0 bit, remove both the 7mm and 5.5mm screws. 
 
- 
            
- 
                  
                  - 
            From left to right, unscrew the 5.5mm screw, the 7mm screw, and the 5.5mm screw located in the battery panel with the screwdriver. 
 
- 
            
- 
                  
                  - 
            Remove the RAM panel by unscrewing the three screws with the PH0 Screwdriver Bit. 
- 
            Remove the RAM panel using a plastic opening tool. 
 
- 
            
To reassemble your device, follow these instructions in reverse order.
One comment
Difficulty HARD ? oh please… please change to EASY… just some screws?