HP Compaq Presario V3000 Battery Replacement

Written By: Ricky Jaimez
  • Comments: 1
HP Compaq Presario V3000 Battery Replacement

Difficulty

Easy

Steps

3

Time Required

5 minutes

Introduction

Battery replacement is a relatively easy task that requires no tools. Just be sure that you have removed the power plug and allowed the laptop time to cool down.

  1. do4BnuyHEwR1AqaZ

    • Make sure the laptop is powered OFF. Gently turn the laptop over and place it on a flat surface.

    • The battery may be warm or even HOT to the touch.

    • Locate the battery EJECT latch.

  2. 1G6mXAvYRRtlF46Z
    1G6mXAvYRRtlF46Z
    BfNxwDNxZGPSPSsK

    • Grab the laptop firmly on the side and using your thumb, press the eject latch towards the OUTER edge of the device.

    • The battery will be lifted out of the laptop slightly as you press the latch over as far as it will go.

    • When replacing the battery, you DO NOT need to adjust the latch. Once the battery is replaced, snap it into place and the latch will return to normal.

  3. imc6ARsDY5RWrRlS
    imc6ARsDY5RWrRlS
    vptuoeVoTwbyhMKf

    • Pull the battery up and towards you to remove it from the laptop chassis.

    • Once the battery is out, you will be able to check the battery label for the replacement part number.

    • The part number is needed when purchasing a new battery.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Ricky Jaimez

Member since: 20/07/16

342 Reputation

One comment

I need the battery remove switch

Aadhi Dev -