Introduction
The computers hard drive is where all of its data is stored and kept when the computer is turned off. Upgrading it to a larger or faster HDD or SSD is very important in keeping your computer running properly. This simple guide shows how to easily access the HDD bay within the laptop.
Tools
- 
                  
                  - 
            Place the laptop face down in front of you. 
- 
            Use a Phillips #0 screwdriver to remove the three 3 mm screws from the back of the case. 
- 
            Remove the back panel. 
 
- 
            
- 
                  
                  - 
            Use a Phillips #0 screwdriver to remove the two 3 mm screws from the small metal HDD bracket. 
- 
            Lift up on the small bracket and pull it off. 
 
- 
            
- 
                  
                  - 
            Pull out the hard drive and the small rubber sleigh that holds it. 
- 
            Pull the rubber sleigh off of the hard drive. 
 
- 
            
To reassemble your device, follow these instructions in reverse order.
One comment
You can use any mSATA SSD as replacement by using the following caddy/adapter:
https://www.ebay.fr/itm/165266235415
jacques_06