Introduction
If you want to change out your for your HP Envy x360 m Convertible (Model 15m-cn0012dx), use this guide to replace the hard drive.
If you are running low on space, updating a hard drive with a larger drive can give you more space, and could also speed up your computer.
Tools
Parts
- 
                  
                  - 
            Set the laptop face down. 
- 
            Peel back the grey screw guards, along the top and bottom edge of the back case. It may be helpful to use a spudger to get started. 
 
- 
            
- 
                  
                  - 
            Pry open the back cover using the iFixit Opening Tool. 
- 
            While using the tool, place a pick at each corner of the computer (be careful and do it slowly). 
- 
            Once all the corners are slightly lifted, carefully pop off the back cover. 
 
- 
            
- 
                  
                  - 
            Use the Phillips #0 screwdriver to remove one screw from the bottom left corner of the laptop. 
- 
            Use the iFixit opening tool to lift the latch and detach the connector to the motherboard. 
- 
            Remove the hard drive. 
 
- 
            
To reassemble your device, follow these instructions in reverse order.