HP G62-144DX RAM Replacement

Written By: Cameron Moran
  • Comments: 0
HP G62-144DX RAM Replacement

Difficulty

Easy

Steps

3

Time Required

1 minute

Introduction

This guide will show you how to remove the back panel and replace the 2 RAM modules in the HP G62-144DX.

  1. UFoacN4fT3GDouli
    UFoacN4fT3GDouli
    DZg3M5ltYx1fTePc

    • Make sure to turn off the laptop before removing the battery.

    • Slide the lock to the right, located slightly above the battery location.

    • While pulling the lock, pull the battery out, keeping it flat and parallel to the laptop so that it slides out easily.

  2. kUeiusAfvp2Zl53k
    kUeiusAfvp2Zl53k
    FRo1DjphvgmT6IKh
    YSQOdFbwKgSXAViq

    • Unscrew the three Phillips 2.5x6 screws in the L-shaped panel on the back with a Phillips #1 screwdriver.

    • The screws will stay in the panel, but will come loose from the body of the laptop.

    • Use a plastic opening tool to gently pry the panel free from the laptop.

  3. slBOHnASFPPZYXqN
    slBOHnASFPPZYXqN
    sIUBZEDY5GWTEiGI
    CO112TwUiVkXnmLm

    • Pull the two metal clips to the top RAM module outwards parallel to the laptop.

    • After the RAM module pops up, gently pull in out from the computer.

    • Repeat for the second RAM module.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Cameron Moran

Member since: 18/10/17

623 Reputation

0 comments