HP Pavilion 15-ca2073cl Back Cover Replacement

Written By: Justin Ogihara
  • Comments: 1
HP Pavilion 15-ca2073cl Back Cover Replacement

Difficulty

Easy

Steps

2

Time Required

4 - 5 minutes

Introduction

Prerequisite only guide.

  1. p2vEHeVF1SxfCQxx

    • Before beginning, make sure the laptop is completely turned off by pressing the off button and waiting for the screen to turn black.

    • Flip the laptop over.

    • Remove all the 6.5mm screws (black) and the 4.8mm long screws (silver) using the Phillips #00 screwdriver.

  2. Je2TbOLLBcLe5TyS
    Je2TbOLLBcLe5TyS
    KEGsrkOqUT1HNmpE

    • Use an iFixit opening tool to wedge in between the case and the body of the laptop.

    • Start from the front and work down both sides, disconnecting clips.

    • Remove the bottom case from the body.

    If the cover is stuck, work the opposite side completly loose and the opposite side from the back. Then use you fingers to pry loose the stuck part from both sides of the stuck part.

    Chuck McCracken -

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Justin Ogihara

Member since: 18/09/17

28702 Reputation

0 comments