HP Pavilion 17-x047na Back Panel Replacement

Written By: Sarah Westberg
  • Comments: 0
HP Pavilion 17-x047na Back Panel Replacement

Difficulty

Moderate

Steps

4

Time Required

5 - 10 minutes

Introduction

Follow this guide if you need to replace the back panel of your HP Notebook 17-x047na.

  1. Qc6ilB6Y1OG3FI6r
    Qc6ilB6Y1OG3FI6r
    lvSVuLuAOJydhOmx

    • Turn off and unplug the laptop before replacing the battery.

    • The netbook needs to be top-side down with the lid closed.

    • Slide the plastic battery release latches towards the lock symbols.

  2. DYU1pWFVDxxi5vnE

    • Slide the battery out from the laptop.

  3. YXJeKmy5etUIxnQ3
    YXJeKmy5etUIxnQ3
    PjG5yiaIHuAXHywL

    • Using a Phillips #0 screwdriver, remove thirteen 7.0 mm screws from the back case.

    • Using a Phillips #0 screwdriver, remove the CD/DVD drive screw.

    • Use an ejection pin to eject and remove the CD/DVD drive.

  4. xPfTCBqne2BEZ1sW
    xPfTCBqne2BEZ1sW
    QoRyXpygfG6E46YY

    • Use an iFixit opening tool to separate the back cover from the laptop.

    • Gently pry open the cover, trying not to break the plastic.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Sarah Westberg

Member since: 11/03/19

26562 Reputation

0 comments