HP Pavilion dv2000 Wireless Card Replacement

Written By: Erik Muniz
  • Comments: 0
HP Pavilion dv2000 Wireless Card Replacement

Difficulty

Easy

Steps

3

Time Required

10 - 20 minutes

Introduction

This guide will help you replace the wireless card on you HP Pavilion dv2000.

  1. 6uYEdpSkZIdO1wmX
    6uYEdpSkZIdO1wmX
    nEPkRGgO6f5rwXNv

    • Make sure your computer is powered down and unplugged from the charger before removing any components.

    • Locate and unscrew the single 3.8mm screw holding the wireless card casing in place.

    • Lift up and remove the wireless card casing.

    • The 3.8mm screw will remain in the wireless card casing after you unscrew it.

  2. mIaQxRnKVDu2PvAv
    mIaQxRnKVDu2PvAv
    mJhThxRsMclmOHtV

    • Use a pair of tweezers to remove the three antennas from their sockets.

    • Remove the antennas by the contacts connected to the socket, the crimps connecting the wires and the sockets are delicate and are easily damaged.

  3. EevX36Bvw3wlGrbb
    EevX36Bvw3wlGrbb
    bfjEvXXJyHC3nSDP
    WR66X1Q3tZWF5i1J

    • Remove the two 3.8mm screws holding down the wireless card with your Phillips #00 Screwdriver.

    • Gently pull out your wireless card from its top side to remove it from its holding.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Erik Muniz

Member since: 09/09/14

820 Reputation

0 comments