Introduction
Tools
- 
                  
                  - 
            Slide the battery release bar to the left, this should release the battery so you can then remove it. 
 
- 
            
- 
                  
                  - 
            Locate the three screws for the keyboard by finding the small keyboard picture, remove these screws and flip the laptop back over. 
 
- 
            
- 
                  
                  - 
            Use the plastic opening tool to get underneath the plastic bar above the keyboard, pry upwards. Pry the keyboard upwards gently. 
 
- 
            
- 
                  
                  - 
            Release the ribbon cable by using a flathead screw driver. Release the two tabs holding the cable and pull outwards. 
- 
            Pull the keyboard up and out from the laptop. 
 
- 
            
                            
                            Conclusion
                          
                          To reassemble your device, follow these instructions in reverse order.