Introduction
Since HP Stream 7 is a tablet and has many small parts. Be careful when removing/replacing parts. Do not force anything to avoid breaking device material.
Tools
- 
                  
                  - 
            Make sure the tablet is powered off before beginning. 
- 
            Gently run the plastic opening tool or your fingernails around the tablet to pry the Back Cover from the tablet. 
 
- 
            
- 
                  
                  - 
            Remove the eight 5 mm Phillips 000 screws. 
- 
            Gently run the plastic opening tool around the seam to pry the mid back cover from the tablet. 
 
- 
            
- 
                  
                  - 
            Disconnect the battery from the motherboard, but leave the battery on the display panel (unless you have already taken it off). 
- 
            Disconnect the motherboard from the rear-facing camera, the front-facing camera, the antenna, the power button board, the screen, and the display panel using your spudger. 
 
- 
            
- 
                  
                  - 
            After removing the motherboard, unscrew the four 2.5 mm Phillips 000 screws from the display panel. 
 
- 
            
- 
                  
                  - 
            The screen should now just come right off. Be sure to catch any broken bits if the screen is damaged. 
 
- 
            
To reassemble your device, follow these instructions in reverse order.