Introduction
Replacement of the power cord. Make sure to keep the processor unplugged until finished with replacement.
Tools
- 
                  
                  - 
            Using a #2 Phillips head screwdriver, remove the two 11 mm screws from the base. 
- 
            Pull suction cups straight out. 
 
- 
            
- 
                  
                  - 
            Remove rubber caps using the heavy duty spudger. 
- 
            Remove the four 11 mm screws using the #2 Phillips head screwdriver. 
- 
            Pull base straight out. 
 
- 
            
- 
                  
                  - 
            Using a #2 Phillips head screwdriver, remove the four 9 mm screws. 
- 
            From the open base pull the motor straight out. 
 
- 
            
- 
                  
                  - 
            Using the wire stripper crimping tool cut the black wire connection from the power cord to the motor and then rewire the new power cord to the motor. 
 
- 
            
- 
                  
                  - 
            Remove the three 12 mm screws using the #2 Phillips head screwdriver. 
- 
            Remove the plastic piece by pulling straight up. 
 
- 
            
To reassemble your device, follow these instructions in reverse order.