How to Fix Joy-Con Drift Without Disassembly

Written By: Weijie Chen
  • Comments: 3
How to Fix Joy-Con Drift Without Disassembly

Difficulty

Easy

Steps

8

Time Required

15 minutes

Introduction

This guide shows how to fix Joy-Con drift for the Nintendo Switch Joy-Cons.

Joy-Con drift is when the Nintendo Switch thinks that the analog stick (also known as the joystick, controller stick, or thumbstick) of the Joy-Con is moving, but it isn't.

Joy-Con drift may occur as you use the Joy-Cons over time from dust and debris building up. You do not need to disassemble the Joy-Con for this repair. In addition, this guide will not corrode any parts of your Joy-Con controller.

Please note this repair is temporary and will last only a certain amount of time.

  1. VYMkybbFhMGSFFLl
    VYMkybbFhMGSFFLl
    HRDdKhNd5uMfQRWQ

    • Press and hold the black round button on the back of the Joy-Con, then slide it forward to remove.

  2. 2ThtXt5G6PIuKYNO
    2ThtXt5G6PIuKYNO
    GV6CPVS1yTFLQaLL

    • Open the 404B contact cleaner and insert the tube into the nozzle.

    Puede ser WD-40?

    John -

  3. YoZpYPqpMFrc5LQk

    • Push the Joy Stick to the side and hold.

  4. XxQ6W3pOBNo3L1SU
    XxQ6W3pOBNo3L1SU
    FF2cFXdyhRAHYUZE

    • Use tweezers to lift the rubber ring under the Joy Stick, and hold.

  5. nfDQLQMdspkq24yL
    nfDQLQMdspkq24yL
    cvHNPG4WkVMSNspl

    • Aim the contact cleaner's nozzle at the gap and spray 404B contact cleaner once or twice.

  6. O6C2N2CYgBqoTV6H
    O6C2N2CYgBqoTV6H
    SeXky16BJlh3bE3q
    L2rPxZSikdAZybC3

    • Rotate the Joy Stick for 30 seconds to allow full penetration of the liquid inside.

  7. StQ3JakQVbNHuroH

    • Wait 10 minutes for the liquid to dry completely.

  8. kDvpcSLM1oSKD1fC
    kDvpcSLM1oSKD1fC
    VeEINjNWi1qgOIcH
    raXxaGJ2ce5V1x2A

    • Insert the Joy-Con back into the Switch to test the Joy-Con.

    • Navigate to System Settings > Controllers and Sensors > Calibrate Control Sticks.

    • Follow the on-screen prompts on your Switch.

Conclusion

Enjoy your Joy-Con being able to work properly again!

Author

Weijie Chen

Member since: 16/01/22

917 Reputation

2 comments

Muchas gracias.

AlmudenaPita -

Process says it requires compressed air then goes on to use contact cleaner instead.

Mike Burr -