Introduction
This guide shows how to loosen the main cover for the Honda EU3000IS1AWK 3000 watt generator in order to access the internal components.
This is a prerequisite guide! This guide is part of another procedure and is not meant to be used alone.
Parts
-
-
Use a 10 mm socket to remove the four capped nuts securing the rear cover.
-
Remove the rear cover.
-
-
-
Use a 10 mm socket to remove the four bolts securing the muffler protector.
-
Remove the muffler protector.
-
-
-
Pull the muffler shroud slightly away from the frame to access the top frame bolts.
-
Use a 10 mm socket to remove the two bolts securing the top edge of the cover.
-
-
-
Use a 10 mm socket to remove the four bolts from the maintenance cover side.
-
Remove the maintenance cover.
-
To reassemble your device, follow these instructions in reverse order.
