How to make your own oval screwdriver for Jura Ena

Written By: Thierry Helminger
  • Comments: 10
How to make your own oval screwdriver for Jura Ena

Difficulty

Very easy

Steps

1

Time Required

3 minutes

Introduction

  1. tYElAnfamZEcQFQ3
    tYElAnfamZEcQFQ3
    hMhHGaRrbQENS4DH
    GAYQVgsLHAhXRPoc

    • Buy a hollow screw (4 mm hole) like this one for about 40 cts. Strike it with a hammer. Now you can use it to grab the oval screw and use a regular flat or cross screwdriver to remove the oval screw.

    I found this screw in my IKEA kit for kitchen , 0 euros and it work. thanks

    Thierry Choteau -

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Thierry Helminger

Member since: 14/12/19

271 Reputation

9 comments

great idea! :-)

csepregi.karoly -

It works! that's awesome

Angelo Filippo -

You've got to love the simplicity of hacks like this. Kudos.

Francisco Nogueira -

Thank you for this article! It really works! even with 5mm holed screw it still works :)

ekbduffy -

nice hack, thanks

Georgu Jörg -

Total simpel ! 👍🏻

Stefan Haar -

I simply cut a slot in the oval screw with my Dremel

Namor Ecki -

Ging SUPER EASY - Danke für den Tipp. Nicht zu fest auf die Hülsenschraube klopfen -sonst wird das Oval zu flach. Bei dem zweiten Mall habe ich jetzt den idealen "BIT-Ersatz" noch am Abend herstellen können.

Luke Filewalker -

Wonderful solution. Saved me trouble in getting the oval screw tool.

PP Chen -