Introduction
After a few summers use, the buckle on your bikini may start showing signs of damage or even break entirely. But this is a simple fix, and this guide will help show how you can keep your bikini going without buying a new one.
Tools
-
-
In most cases, the buckle will not have broken, but just the stitching keeping the seam together
-
We will re-use the buckle
-
-
-
Carefully remove the old broken threads from the defective seam, to obtain a clean area again.
-
-
-
Thread the strap back through the buckle and hold in place with your hand.
-
Check that the alignment is correct buy clipping it onto the other buckle
-
Note: this buckle is a sliding design which will only work on one alignment. Other buckles work in different ways, so be sure to check before sewing.
-
Pin the strap in place around the buckle, to secure it before sewing
-
-
-
Use a sewing machine to re-sew the broken seam
-
Offer-up the seam to the sewing machine, depress the foot, and remove any pins which are in the way of the needle
-
Make a locking stitch, followed by a straight stitch. Repeat the straights stitch 1-2 times and finish with another locking stitch.
-
-
-
🛠️🏆👏 Congratulations! The repair is complete, and you're ready to go!
-
You can fasten the buckle and stretch the straps to check if the repair is secure
-
In need of another repair? Don't worry! Check out our other guides to find quick solutions for your favourite clothing, footwear and equipment!
