Introduction
Replacing the Water Filter requires only a couple steps as outlined below.
Tools
- 
                  
                  - 
            Remove the Water Reservoir Cap and the Water Reservoir from the brewer by simply pulling up and out 
 
- 
            
- 
                  
                  - 
            Remove the three 9.5 mm Phillips #1 screws that secure the small circular screen to the bottom of the water reservoir. 
 
- 
            
- 
                  
                  - 
            This circular screen has a rubber "O"-ring around the base. Use the plastic opening tool to pry off the rubber seal. Replace with undamaged seal. 
 
- 
            
                            
                            Conclusion
                          
                          To reassemble your device, follow these instructions in reverse order.