Introduction
To get to the spring the K-cup assembly housing, the lid, and the water pump will need to be removed.
Tools
- 
                  
                  - 
            Using a Phillips #2 screwdriver unscrew two 2mm screws. 
- 
            Once the screws are out, lift up and squeeze the k-cup assembly housing to take it out. 
 
- 
            
- 
                  
                  - 
            Using the Phillips #0 screwdriver unscrew two 2mm screws on the water pump. 
- 
            Once unscrewed lift the water pump up and pull and twist it off. 
 
- 
            
                            
                            Conclusion
                          
                          To reassemble your device, follow these instructions in reverse order.