LG Muziq LX570 Front Case Replacement

Written By: Raymond Ching
  • Comments: 0
LG Muziq LX570 Front Case Replacement

Difficulty

Easy

Steps

3

Time Required

10 - 15 minutes

Introduction

  1. Ij6f5gaE3prryC6g
    Ij6f5gaE3prryC6g
    gOxcplCLFqUBwCKW

    • Use a spudger to remove the two screw covers below display.

    • Use a screw driver to remove the four Phillips #00 (3.3mm) screws at corners of the display.

  2. BQsRDLKiSttBo5ZP
    BQsRDLKiSttBo5ZP
    ufAERPlYNv2k5QCi
    GRriPlaiJNjZIEWD

    • Caution: Wires and ribbon connect the front case to the main body. Exhibit care when separating front case from the main body as to not break the connections.

    • Note: Side buttons may fall out when removing the front case. Do not misplace them.

    • Note: Each side button will only fit in the side that it came from.

    • Insert a spudger between the black and grey casings and gently spread them apart.

    • Work around the device gradually, opening the gap further.

  3. YVDENlhBjjJKwLUX
    YVDENlhBjjJKwLUX
    1ABb5arP6FFkGVEJ
    UJuIWhcokyIyiNZm

    • Caution: The wires and ribbon connector can break easily. Exhibit care when removing them.

    • Use the spudger and lift upward to disconnect the ribbon from the main part of the phone.

    • Carefully remove any parts stuck to the front case such as speakers.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Raymond Ching

Member since: 20/01/12

1 Reputation

0 comments