Introduction
How to replace the phone's soft keypad.
Tools
- 
                  
                  - 
            Press button labeled "Push". In the photo depicted the button is being depressed by the left finger. 
- 
            Pull back panel toward bottom of phone. 
 
- 
            
- 
                  
                  - 
            Starting at the top of the phone near the antenna, use a screwdriver or other small tool, maybe even fingernails, to pry the rear panel off. 
- 
            By systematically prying up the edges of the back panel, moving about a quarter of an inch, and prying again, the panel will begin to lift off. 
- 
            Don't be afraid to damage anything, the panel requires a bit of force to detach. 
 
- 
            
- 
                  
                  - 
            The logic board is only held on with 4 tabs and a data cable in the top right. Simply pry from one side using a screwdriver, popping out the board, before lifting the display data cable. 
 
- 
            
To reassemble your device, follow these instructions in reverse order.