LeapFrog LeapTV UART console

Written By: Elliott Kolber
Published: 27/05/24
  • Comments: 0

LeapFrog LeapTV UART console

Published: 27/05/24

Teardown

Introduction

This guide will show you how to connect and use the LeapTV's UART console

  1. rkbG3YQlFknPd4pd

    • Remove the Little plastic Thingies that the black arrows are pointing to.

  2. VJBdSFceAncfwZoD

    • Now, with a smaller philips screw driver, remove the 4 screws (the black arrows are pointing to).

  3. With your hands or the help of a flathead screwdriver, remove the top of the LeapTV

    • With your hands or the help of a flathead screwdriver, remove the top of the LeapTV

    • To put it back together follow these steps. Though, i personally just didnt put the screws back in becuause of how convenint

Author

Elliott Kolber

Member since: 11/09/23

199 Reputation

0 comments