Lenovo IdeaPad Flex 4-1130 Motherboard Replacement

Written By: Adrian Miranda
  • Comments: 1
Lenovo IdeaPad Flex 4-1130 Motherboard Replacement

Difficulty

Moderate

Steps

10

Time Required

25 minutes

Introduction

A motherboard replacement is an uncommon procedure, but can oftentimes be a necessary step in fixing your Lenovo IdeaPad Flex4-1130. If you are in need of new RAM or are experiencing trouble with your Lenovo IdeaPad Flex4-1130 and have ruled out other components, a motherboard replacement is an efficient way to refresh your Lenovo IdeaPad Flex4-1130.

  1. ethm1CeNfZU5DEZ2

    • Power off your Lenovo Ideapad Flex4-1130 before beginning disassembly.

    • Remove the ten 4mm screws from the back panel.

  2. aOdRNYICJtl4CAnt

    • Insert the spudger into the groove work your way around the laptop to separate the bottom from the case.

    • Do not insert the spudger too deep! This could potentially damage a device part.

    It is going to feel like you may have missed a screw but you actually haven't. Just be very careful releasing the back panel as the clips are fairly strong.

    Brian Geisler -

  3. OUNQaEYvMNXU1isQ

    • Remove the connector attaching the battery to the motherboard.

  4. WaNDBij2LYPFQUSq

    • Remove the four 4mm screws on the battery.

  5. GodmvHLWqvp3fFeD

    • Lift the battery with a spudger and remove.

  6. KxsoO1kGhlQQVqtC

    • Remove eleven 6mm screws.

  7. 5OHJVWSOMhvk4lVI

    • Lift up black flap on the ZIF connector and pull the ribbon cable out.

  8. PLrUXZPVnYyHYIBn

    • Lift up on the black tab on the ZIF connector and pull the ribbon cable out.

  9. KXNQH6TjKQx6A3GD

    • Remove connector cable.

  10. p6ug5rYVLBwSZbGl

    • Remove one last connector cable.

    • Motherboard should now be completely disconnected and can be lifted off the cover to be replaced.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Adrian Miranda

Member since: 15/02/18

677 Reputation

0 comments