Introduction
If your RAM is insufficient or failing, you may want to replace or upgrade it by following this guide.
Tools
- 
                  
                  
- 
            
Turn over the device so that the bottom is facing up. Make sure the hinged side is facing you.
 
 - 
            
 - 
                  
                  
- 
            
Move the right switch towards the right until it clicks in place. You should then see the color red reveal from where the switch was originally.
 
 - 
            
 - 
                  
                  
- 
            
Rotate the laptop so that now the hinge is facing away from you.
 - 
            
Remove the two 2.5 x 4.0 mm Phillips #0 screws from the underside of the laptop.
 
 - 
            
 - 
                  
                  
- 
            
The RAM sticks can be found at the bottom right of the laptop.
 - 
            
Carefully press the two silver buttons on either side of the stick outwards. This will cause the RAM to “pop” up.
 
 - 
            
 
                            
                            Conclusion
                          
                          To reassemble your device, follow these instructions in reverse order.