Lenovo Ideapad 320-15ABR Back Panel Replacement

Written By: Anurag Deb
  • Comments: 1
Lenovo Ideapad 320-15ABR Back Panel Replacement

Difficulty

Moderate

Steps

5

Time Required

2 minutes

Introduction

This guide will show you how to disassemble the back panel for the device.

This guide is also a prerequisite guide for other hardware part replacement.

  1. i2OWcAbPmAGRGSND

    • Before you proceed, make sure your computer is turned off and is not connected to any power source.

    • Remove the single 7 mm Phillips #1 screw securing the optical drive.

    • Be sure to store the screws carefully as they are easy to lose. A magnetic project mat is recommended

  2. 5efQEBK35P4UNvZ5
    5efQEBK35P4UNvZ5
    krNoDHkMRA2ZJSfv
    wA11hPLxZRoSWDMV

    • Carefully remove the optical drive bracket by pulling the bezel away from the laptop.

  3. QafRtKMYGCtUPJge
    QafRtKMYGCtUPJge
    6osb1LdBNDTvFmny

    • Using the Phillips #1 screwdriver, remove the twelve screws around the back panel from the laptop.

  4. eOGgCw42XoGhIWWw
    eOGgCw42XoGhIWWw
    QQKRGI4YpPJcKhMW
    FsKr6Q66LBahhyIi

    • Use an opening tool to pry out the back cover.

  5. AJC2jGAuHabCs2Kg
    AJC2jGAuHabCs2Kg
    kc3iNKCr1JJXLvNg
    bkQYfatVYgex51Py

    • Remove the back panel by pulling it up and away from the laptop.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Anurag Deb

Member since: 31/10/18

1072 Reputation

One comment

How Is solved Twisted screw and broken inside the frame

For laptop ip520

mohsen JUVE -