Lenovo Ideapad Flex 15 Bottom Panel Replacement

Written By: Brent
  • Comments: 0
Lenovo Ideapad Flex 15 Bottom Panel Replacement

Difficulty

Moderate

Steps

6

Time Required

5 minutes

Introduction

By the end of this guide, you will be able to remove the back panel from the laptop.

  1. WsCrELRFTKA4SEaF
    WsCrELRFTKA4SEaF
    YdFWgfZwPP1ltaGR

    • Start by removing the feet near the LCD hinge of the laptop to reveal two screws.

    • Using a Phillips #1 screwdriver, remove the top five (30 mm) screws underneath the battery.

  2. cvIunLaBg6SsfXeH
    cvIunLaBg6SsfXeH
    GMjihlVAEQlmHMQk

    • Once both feet are removed, two (40 mm) screws will reveal themselves. Unscrew these.

  3. ajR16IMjy1ThZ1VF
    ajR16IMjy1ThZ1VF
    XLNQHTREORDbnJbA
    reu32yRPjOgCh5YK

    • Working your way around the outer edges of the Flex 15, remove the 8 (30 mm) outer screws.

  4. JVBib5G3yplytlBy

    • Remove the one (40 mm) screw in the middle of the Flex 15.

  5. D6VhCLX1EQCouaxD
    D6VhCLX1EQCouaxD
    S6yTpxCLThWgbsCS
    fMDTdOMYWtwNklAs

    • Using a plastic opening tool, make your way around the edge of the laptop.

    • There is a visible line between the bottom shell of the laptop and the laptop body itself.

  6. kHnGUVT4iLMKw1JT
    kHnGUVT4iLMKw1JT
    bH6dARkCcClhR332

    • Make sure to pry evenly around this edge and only remove the bottom of the laptop when it is fully loose.

    • Using excessive force may break the bottom plastic. There are plastic clips along the edge of the laptop.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Brent

Member since: 04/03/16

804 Reputation

0 comments