Introduction
This guide will teach you how to replace your Lenovo T530/T530i's Keyboard.
Tools
Parts
- 
                  
                  
- 
            
Locate the latch located on the battery near the top of the laptop.
 - 
            
Using your finger, slide the latch to the right-most (Unlocked) position.
 
 - 
            
 - 
                  
                  
- 
            
You can now pull the battery away from the laptop. When pulling the battery out, ensure to pull it out straight.
 
 - 
            
 - 
                  
                  
- 
            
Using a Phillips #00 screwdriver, unscrew the following screws, and then remove the cover.
 - 
            
Using a Phillips #00 screwdriver, remove the screw. This is one of the two screws that are holding in the keyboard.
 
 - 
            
 - 
                  
                  
- 
            
Using a Phillips #00 screwdriver, unscrew the highlighted screw. This is the last screw securing the keyboard to the laptop.
 
 - 
            
 - 
                  
                  
- 
            
Place each of your two thumbs on the bottom-left and right most corners of the keyboard (towards the arrow keys, and the Fn (Function) key).
 - 
            
Gentilly and slowly push the keyboard up (towards the display)
 - 
            
Lift the two corners of the keyboard up enough to see the ribbon cable below.
 
 - 
            
 - 
                  
                  
- 
            
Angle the keyboard upwards, at a 90° angle.
 - 
            
Keep one finger holding the keyboard up, while using the other to disconnect the ribbon cable. To disconnect the ribbon cable, lift it up by the highlighted yellow end.
 
 - 
            
 - 
                  
                  
- 
            
Reinsert the bottom memory cover, ensuring all clips are in place.
 - 
            
Using a Phillips #00 tighten the two highlighted screws.
 
 - 
            
 
You're now done replacing your Lenovo T530's Keyboard all by yourself, great work!