Lenovo Yoga Tab 3 8 Back Cover Replacement

Written By: Nicklaus Krems
  • Comments: 3
Lenovo Yoga Tab 3 8 Back Cover Replacement

Difficulty

Easy

Steps

3

Time Required

5 minutes

Introduction

  1. cm1pns6CXOeA1gnN
    cm1pns6CXOeA1gnN
    LHZ1pliMerjNWRcE
    ny5kbBBYCTyl5RkT

    • Open the kickstand by pressing the release button in the center.

    • Remove the identification sticker with a pair of tweezers to allow access to the two 2mm screws underneath.

  2. HVBRIfEPDtLGSnOf

    • Remove the three 2mm screws under the kickstand with a PH00 screwdriver.

    • The third 2mm screw to the right may have an S sticker covering it which you can scrape off.

    PH000 is the correct size.

    Thomas Cacaj -

  3. P6lo1P3sabidJ3wS
    P6lo1P3sabidJ3wS
    gUxxQYUAIWXyoLFf
    KTi5NnEQNwBmPYAO

    • Starting along the edge opposite of the hinge, insert a plastic opening tool between the screen and the backing to begin separating the small clips holding the backing on.

    • Work along the edge and then up the sides, separating the clips with the plastic opening tool.

    • There is adhesive underneath the slot for the SD card so you will need to slowly apply some force to break the adhesive.

    • As the back is separated from the device, be careful to not lose the power button. It may come loose and fall out.

    this step is not clear. Where are the clips ? The screen looks inset. How to insert the tool ?

    Chiruvolu Sivachander -

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Nicklaus Krems

Member since: 25/09/17

1067 Reputation

One comment

Had put the SIM in the Memory card slot, instructions came in handy.

Brijesh Rajashekara -