Introduction
If your Levoit LVAC-200 vacuum is experiencing weak or inconsistent suction, it may be due to a clogged filter. To restore maximum performance, follow this simple guide to replace the filter. Before starting, make sure to empty the dustbin to avoid any unnecessary mess.
-
-
Press down on the white oval button located on the side of the vacuum.
-
Hold onto the dust container and pull forward to remove the dustbin.
-
-
-
Located directly within the vacuum body, firmly turn counterclockwise and pull the HEPA filter downward to remove it.
-
Conclusion
To reassemble your device, follow these instructions in reverse order.
