Introduction
In this guide you will remove the router's front case and begin to have access to the router's internal components.
Tools
- 
                  
                  
- 
            
Remove the rubber inserts inside the the two purple feet located on the router's front case.
 - 
            
This may be a challenge, so try the following two methods:
 - 
            
Use a plastic opening tool. Insert the flat end of the tool into the seam and slowly pry the rubber feet out.
 - 
            
Use a metal spudger. Insert the point of the metal spudger directly into the hole of the rubber feet and pry the insert out.
 
 - 
            
 - 
                  
                  
- 
            
Use a Phillips #2 Screwdriver to remove the two 5.8 mm screws holding the front case to the motherboard.
 
 - 
            
 - 
                  
                  
- 
            
Squeeze the sides of the router's backcase inward and pull off the purple front case. It is helpful to have a second person assist you for this step.
 
 - 
            
 
To reassemble your device, follow these instructions in reverse order.