Introduction
This guide will show you the process to disassemble the device and replace the motherboard.
Tools
- 
                  
                  - 
            Open the latch that accesses the charging port 
- 
            Remove the black sticker and remove the screw with the indicated screwdriver 
- 
            Take the plastic opening tool and run it down the side of the remote to pop the case open 
- 
            Detach the white clamp to partially disconnect the case from the motherboard 
 
- 
            
- 
                  
                  - 
            Peel back thin yellow plastic film and detach the clip found underneath 
- 
            Remove the screws that connect the motherboard to the case with the suggested screwdriver 
 
- 
            
- 
                  
                  - 
            Next, carefully remove the motherboard from the top piece of the case 
- 
            You should now be able to access all of the buttons and remove them from the case 
 
- 
            
To reassemble your device, follow these instructions in reverse order.